<?xml version="1.0" encoding="UTF-8"?><rss version="0.92">
<channel>
	<title>My Paddock Pool Sucks</title>
	<link>http://www.mypaddockpoolsucks.info</link>
	<description>My Paddock Pool Construction Nightmare</description>
	<lastBuildDate>Mon, 09 May 2011 06:00:50 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	<!-- generator="WordPress/3.2.1" -->

	<item>
		<title>SWG Repair</title>
		<description><![CDATA[After calling Hayward, who builds the Aqua Rite, and performing some tests they said it was defective. It was still under their two year warranty so they gave me the name of a service that could replace it. Watertec came out and replaced the unit in no time. The old unit showed the salt level [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2011/05/08/swg-repair/</link>
			</item>
	<item>
		<title>SWG Problem?</title>
		<description><![CDATA[I went out to check the chlorine and acid levels and noticed the chlorine was low. The SWG said that it had switched to low output due to low salt level. I checked the salt level and it is at 3600, well within the operating range of the cell. I pulled the cell and cleaned [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2010/10/09/swg-problem/</link>
			</item>
	<item>
		<title>Clean Filters</title>
		<description><![CDATA[The cartridge filters needed cleaning again. I pulled them out and soaked them in cleaner for a day. Then rinsed them out and reinstalled them. Operating pressure dropped back to 20psi. While I had them out I also cleaned the SWG again. I am looking to add a sand filter before the cartridge filters to [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2010/08/17/clean-filters/</link>
			</item>
	<item>
		<title>SWG Cleaning</title>
		<description><![CDATA[I cleaned the SWG today. The 3 month cleaning was needed. It had already plugged up with calcium. A dip in pool acid mixed with water cleaned it right back up. Reinstalled it and it is back to generating chlorine.]]></description>
		<link>http://www.mypaddockpoolsucks.info/2010/06/02/swg-cleaning/</link>
			</item>
	<item>
		<title>Leaf Screen</title>
		<description><![CDATA[The screen for the in ground leaf basket ripped. I found a replacement for $60.00 or I could replace the nylon net with a hard plastic basket for $90.00. I was told by the local pool supply store that the plastic basket should last much longer than the net. I also checked the light in [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2010/05/06/leaf-screen/</link>
			</item>
	<item>
		<title>Light Shorted</title>
		<description><![CDATA[Today I finally broke down and pulled the light from the deep end. It had thrown the GFI breaker last November and Paddock said it was not covered by warranty so I decided to take a look. It seems that the rust proof housing had rusted through and the light filled with water. I am [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/10/13/light-shorted/</link>
			</item>
	<item>
		<title>SWG Installed</title>
		<description><![CDATA[Finished installing the salt water chlorine generator. After refilling the pool, salt level down to 3400. SWG seems to be running fine. Set it to super chlorinate to see what happens.]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/05/28/swg-installed/</link>
			</item>
	<item>
		<title>New Chlorinator</title>
		<description><![CDATA[The salt water generator came in today. I mounted the controller to the wall and started draining the pool. I figured I will need to drain 25% of the water to get the salt level down to the new level for the new SWG. I removed the worthless ozone generator. The cost to repair is [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/05/27/new-chlorinator/</link>
			</item>
	<item>
		<title>SWG</title>
		<description><![CDATA[I ordered a new chlorine generator today. I think I will try a Hayword Aqua Rite 40k. They were on sale for about $900. Was hoping to install it over the holiday, but they were sold out.]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/05/22/swg/</link>
			</item>
	<item>
		<title>Heatpump works</title>
		<description><![CDATA[Gillespie A/C called me and had me do a reset on the heatpump. This was basically tuning off the power to the heatpump and letting it sit, then restarting it. That seemed to fix it. It restarted with no errors. You would think it ran on Windows XP.]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/05/19/heatpump-works/</link>
			</item>
	<item>
		<title>Heatpump Error</title>
		<description><![CDATA[Paddock came out and repaired the leaking pipe at the filter. Another $65.00 service charge. When I restarted the pool pump after waiting about an hour for the glue to dry, the heatpump error code popped up saying the suction TH open. The heatpump refused to start. Gillespie A/C said that the temp sensor has [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/05/18/heatpump-error/</link>
			</item>
	<item>
		<title>Junk</title>
		<description><![CDATA[I blew out the main drain today, I had to hook up my air compressor to the drain filter and blow out the debris. Since Paddock was sure it was not a warranty problem I decided to do it myself. I found a chunk of plaster that was stuck inside the drain pipe. I wonder [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/05/08/junk/</link>
			</item>
	<item>
		<title>Drain Plugged</title>
		<description><![CDATA[The main drain is clogged up. I attempted to clean out the main drain that has plugged with leaves. Due to the use of security screws holding the lid on it I am unable to get to the drain pipe to free up the clog. Will have to have either Paddock or a pool service [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/04/27/drain-plugged/</link>
			</item>
	<item>
		<title>Heat pump Repair</title>
		<description><![CDATA[Gillespie A/C called and quickly came out to look at the unit. They determined that a capacitor had failed and replaced it. I am leaving the unit to run for a few days to see if it will continue to operate. Gillespie A/C was very helpful and their response was quick.]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/03/05/heat-pump-repair/</link>
			</item>
	<item>
		<title>Pentair Email</title>
		<description><![CDATA[I received an e-mail from Pentair stating they will have Gillespie A/C contact me about evaluating the heat pump and advise them of his findings..]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/03/04/pentair-email/</link>
			</item>
	<item>
		<title>Checked heat</title>
		<description><![CDATA[I checked the temp today. It read 68. Fan running but it doesn&#8217;t sound like the compressor is running. I contacted Pentair via their website asking how many times it has to be repaired before they replace it. It seems to fail every time I try to heat or cool the pool. My advice on [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/03/03/checked-heat/</link>
			</item>
	<item>
		<title>Turned heater on</title>
		<description><![CDATA[Turned heat pump on to see if it will warm up. set at 90. Currently 68]]></description>
		<link>http://www.mypaddockpoolsucks.info/2009/02/22/turned-heater-on/</link>
			</item>
	<item>
		<title>Electrical Short</title>
		<description><![CDATA[I tried to turn the lights on in the pool for Halloween and found out the lights in the deep end are blowing the GFI breaker. Somewhere they have a ground fault. I should have tried the lights during the summer when it was warmer.]]></description>
		<link>http://www.mypaddockpoolsucks.info/2008/11/01/electrical-short/</link>
			</item>
	<item>
		<title>ECOmatic Not Covered</title>
		<description><![CDATA[Paddock came out and replaced the o-ring for the cleaning system. He will return to fix the filter leak, he did not have the parts needed to fix it. The Jandy valve was also repaired. Loss of prime was due to the cover on the pump basket not being tight enough and allowing air into [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2008/07/16/ecomatic-not-covered/</link>
			</item>
	<item>
		<title>2 Year Warranty</title>
		<description><![CDATA[I called Paddock and spoke with Andrew about the problems with the pool. He said a tech would be out on Wednesday, July 16. He notified me that the 2 year warranty was up as of 03-2008. I wonder where they got that date because the actual completion date was 04-26-2006 per Ed Ghiz. He [...]]]></description>
		<link>http://www.mypaddockpoolsucks.info/2008/07/14/2-year-warranty/</link>
			</item>
</channel>
</rss>

